Transistor Tester Integrated Circuit IC Tester Meter Maintenance Tester MOS PNP NPN Detector 3.3V/5.0V/Auto Search Mode

Multifunctional integrated circuit tester instructions: TSH series of multi-function integrated circuit tester is a first-line microelectronics engineers, maintenance staff designed professional equipment. Can choose different test mode 5v mode, 3.3v mode, Auto Mode Instructions: There are seven buttons on the panel are up, down, left, right and Enter keys, and shortcut keys O, P keys. Up and down keys used to adjust the directory and change the model number, left and right keys for moving the cursor left and right to select the item you want to change. Enter key is used to switch machine and execute test command. Open the battery cover, into the two 5 # 1.5v battery, and then close the battery cover. Press Enter for more than 2 seconds to boot, boot automatically displays the current battery voltage, when the battery is too low, please replace the battery, the voltage is too low will affect the reliability of the test results and protective automatic shutdown. Power on: Press Enter key for more than 2 seconds to turn on. Shut down: 1 Press the Enter key in the OFF directory immediately shut down. 2 Press Enter in any directory for more than 10 seconds to shut down. 3 After 60 seconds without any operation, it will automatically shut down Fast: 1 The key for the fast shutdown button (06 type) 2 P button repeat self-test, reset button Device placement method as shown below: 1, the chip, optocoupler placed on the top of the alignment, 1 feet aligned IC seat 1 foot. 2, the transistor on the leftmost three slots. 3, IC regulator put the seat 13 and 14 feet. Note: The transistor display pin sequence from left to right corresponds to IC Block 10 feet, 11 feet, 12 feet. ( not incldue battery or adapter)

• TSH series multifunctional integrated circuit tester is a professional instrument designed for first-line microelectronic engineering personnel.
• There are more than 1300 kinds of chip data models and 420 kinds of transistor data transverse types, covering most common common devices within 24 feet, which can greatly reduce workload and improve work efficiency.
• Different test modes such as 5v mode, 3.3v mode and AUTO mode can be selected to test i74H series, 748 series, CD4000 series, HEF400 series, 4500 series, operational amplifier, interface chip, optocoupler, automatic identification of most body tube, identification of voltage regulator tube, etc.
• There are seven keys on the panel: up, down, left, right and Enter, and the shortcut keys 0 and P. The up and down keys are used to adjust the directory and change the model number, and the left and right keys are used to move the cursor left and right to select the item to be changed.
• The Enter key is used to switch on and off machines and execute test commands.Open the back cover of the battery, put in 2 no.5 1.5v batteries, and then close the battery cover.Press Enter for more than 2 seconds before starting the machine. When starting the machine, the current battery voltage will be displayed automatically. If the battery is too low, please replace the battery.