Mini Small Camera, 5G Wi-Fi DIY Home Security Camera, Small and Portable Camera

Notes, Setup Steps, and Reset Operations: *Notes: 1. Before configuring the camera's Wi-Fi, your mobile phone must have Bluetooth and location services enabled and be connected to a Wi-Fi . The camera must be properly connected to Wi-Fi to function. The camera supports 2.4G/5G/4G. 2. When installing the Tuya Smart App, you must allow app permissions. If you register your camera account using an email address, the verification code sent by the camera app may be blocked by your email service provider. Therefore, please check your spam folder for the verification code. To ensure successful camera account registration, you can also register using another account. 3. Before setting up the camera, please check and back up your current Wi-Fi password on your phone. During the pairing process, be sure to enter the correct Wi-Fi password to ensure successful setup; otherwise, the camera will not connect. If the setup fails, you must first restore the camera to factory settings before resetting the . 4. During the setup process: Please keep the distance between your phone, camera, and Wi-Fi device within 3 meters. To ensure successful setup, please enter the correct Wi-Fi password. After setup is complete, you can remotely control the camera via your phone regardless of distance. When using outdoors, please ensure that your phone's data transmission function is enabled. 5. Note: The videos on the TF card are encrypted and cannot be read by a computer. You can view the videos in the camera app on your phone; you can also save the videos by clicking the "Record" icon in the app. 6. It is normal for the camera to heat up; we have conducted safety checks. Do not place the camera in a metal casing to avoid signal interference. **When do you need to reset the camera? If the setup fails. If the Wi-Fi environment changes. If the camera loses connection for unknown reasons. In these cases, you need to reset the camera. Please also check that the password and steps you entered are correct. How to restore the camera to factory settings? 1. After connecting the camera to the power supply, wait one minute. Using the included stylus, press and hold the reset button or "R" button on the camera for about 10 seconds, then release. After two minutes, when the blue indicator light flashes two to three times per second, the reset is successful. You can then begin configuring the camera to connect to your . ***Camera Setup Steps: 1. Turn on Bluetooth, enable location tracking, and connect your phone to a Wi-Fi. Download and install the Tuya Smart app on your phone. Please refer to the "Important Notes" above. 2. Register a camera account. Please refer to the "Important Notes" above. 3. Connect the camera to a power source. After two minutes, the blue indicator light will flash two to three times per second, indicating successful setup. This means the camera is working correctly and is waiting for Wi-Fi configuration. If the indicator light does not flash, please refer to the "Resetting the Camera" section above. 4. Open the Tuya Smart app, and tap the "+" or "Add Device" in the upper right corner. The app will automatically search for nearby smart cameras. Tap on the scanned "Smart Camera". 5. Select the name of the Wi-Fi you want to connect to and enter the correct password. An incorrect password will result in a connection failure. 6. After a two-minute countdown, the connection is complete. You can now start using the device. You can view live footage or configure other functions. 7. Note: If the installation fails, please refer to the instructions above on how to reset the camera. You can also contact the seller through the "Order Window". The seller will be happy to assist you and provide a solution.

• 1. This mini home security camera must be connected to Wi-Fi before use. This is a high-end camera . It uses the free Tuya Smart app and is compatible with both iPhone and Android phones. This camera does not have night vision capabilities.
• 2. This mini camera supports 5V DC power input for long-term recording (Note: Mobile phone charger and TF card are not included). After a full charge, the battery can last for 6 to 8 hours after disconnecting the charger. The camera supports TF cards from 8GB to 128GB. Cloud storage is not recommended (Note: Cloud storage will be disabled after restarting the camera).
• 3. Connect the camera to a power source. After 2 minutes, the blue indicator light will flash at a frequency of 2 to 3 times per second, indicating that the camera is working properly and waiting for Wi-Fi setup. If the red or blue indicator light is constantly on, or the blue indicator light flashes once per second, you need to restart the camera.3. Connect the camera to a power source. After 2 minutes, the blue indicator light will flash at a frequency of 2 to 3 times per second, indicating that the camera is working properly and waiting for Wi-Fi setup. If the red or blue indicator light is constantly on, or the blue indicator light flashes once per second, you need to restart the camera.
• 4. This small and discreet camera is equipped with an HD lens, capable of recording high-quality video even in normal lighting conditions. It does not have night vision or two-way audio capabilities. A TF card is required. After connecting to Wi-Fi, the camera will automatically record video and save it to the TF card, saving storage space on your phone. The camera will continue recording even if the application is closed.
• 5. This small camera features motion detection and message notification functions. You need to enable notification permissions in the application. The camera has an automatic loop recording function. The videos recorded on the TF card are encrypted. If you move the camera to a new location, you must restart the camera and connect to the new Wi-Fi to use it.